40G and 80G Water Filters by Big Foot Manufacturing

High Volume
Water Filters

Best Viewed 800x600

(231) 775-5588
1480 Potthoff Rd.
Cadillac, MI. 49601

40G and 80G
Filters

Big Foot Filters are designed to be used as an initial filter on the suction side of a pump using surface water sources. The 40G and 80G, rated at 40 gallons per minute and 80 gallons per minute respectively, are made of heavy duty PVC, plastic and stainless steel. Extra large intake areas will require little or no service during the pumping season and will give many years of trouble free service, even under the most severe conditions.

The 40G uses the 6" diameter screen on the outside and 2" diameter inside screen with 1/8" slots with an open area of 20 square inches. The 80G Filter's 12" diameter outside screen has an intake area of approximately 80 square inches and the 6" diameter inside screen has an intake area of approximately 33 square inches.

The 40G and 80G are equipped with a check valve and are ready to connect to your pump. The area between the two screens is filled with bulk-filter matting which has been produced from the finest raw materials and certified fish-safe by an independent bio-assay lab using standard EPA test protocols. The filtering media will provide an effective means of keeping algae and other forms of marine life out of the pumping system. In addition, the extra large inlet area reduces entrance velocities to the point that foreign matter is not picked up by the suction. Also, the large filtering area can retain a substantial amount of foreign matter before it needs service. For applications requiring greater capacity these units can be installed on a manifold. Contact Big Foot Manufacturing for recommendations on large capacity systems.

See our Big Foot Filter Stand

See our Big Foot Pond Screen Sled

*SPECIFICATIONS*
40G FILTER Rated at 40 gallons per minute in clear water. Made of PVC and plastic. 6" outside screen and 2" inside screen with 2" suction connection. 6" screen has approximately 680 ¼ holes with total open area of 33.3 sq. inches. 2" screen has 1/8" slots with total open area of 20 sq. inches. 2" check valve. Bulk-filter matting. See our Big Foot 40 G Filter and Parts Price List	80G FILTER Rated at 80 gallons per minute in clear water. Made of PVC, plastic and stainless steel. 12" outside screen and 6" inside screen with 2" suction connection 12" screen has approximately 1600 ¼ holes with total open area of approximately 80 sq. inches. 6" screen has approximately 680 ¼ holes with total open area of 33.3 sq. inches. 2" check valve. Bulk-filter matting. See our Big Foot 80 G Filter and Parts Price List
*RECOMMENDATIONS*
Avoid putting excess stress on the 2" suction connection. The Filter can be installed vertically or horizontally. If pea gravel is used as the filtering media, be sure it is larger than 3/8" in diameter and irregularly shaped. Round pea gravel tends to fill the inlet holes and reduces capacity. Reassemble the top being careful not to overtighten the stainless steel tie rods. For best results, avoid setting unit directly on the bottom in muddy, weedy or sandy conditions. It is recommended to place on a cement block or similar object when installing. Big Foot Manufacturing can provide a filter stand for the 40G if requested.
See our Big Foot Filter Stand	See our Big Foot Pond Screen Sled